Voron 2.4 R2 350 Slicer

Upload STL/3MF/OBJ/AMF/STEP files, choose a filament and print profile, then slice.

New Batch All Batches

Filament (?)

Profile (?)

Upload Model Files (?)

STL, 3MF, OBJ, AMF, STEP. Changing filament/profile reloads the page and clears selected files.

Auto-apply slicer suggestions (supports / brim) on slice (?)

Copies (?)

Spacing mm (?)

Cell size mm (?)

Bed X mm (?)

Bed Y mm (?)

Thermal

Nozzle °C (?)

1st Layer Nozzle °C (?)

Bed °C (?)

1st Layer Bed °C (?)

Chamber °C (?)

Max Vol mm³/s (?)

Filament Max Vol mm³/s (?)

Fan

Fan Min % (?)

Fan Max % (?)

Fan Off First N Layers (?)

Fan On Below Layer Time s (?)

Slowdown Below Layer Time s (?)

Min Print Speed mm/s (?)

Fan Always On (?)

Retraction

Retract Length mm (?)

Retract Speed mm/s (?)

Deretract Speed mm/s (?)

Retract Before Travel mm (?)

Z Hop mm (?)

Retract on Layer Change (?)

Retract Restart Extra mm (?)

Z Hop Above mm (?)

Z Hop Below mm (?)

Wipe While Retracting (?)

Layers & Shells

Layer mm (?)

1st Layer mm (?)

Perimeters (?)

Top Layers (?)

Bottom Layers (?)

Extra Perimeters (?)

Ensure Vertical Shell (?)

Top Solid Min Thickness mm (?)

Bottom Solid Min Thickness mm (?)

Extrusion Widths

Perimeter Width mm (?)

Ext Perimeter Width mm (?)

Infill Width mm (?)

Solid Infill Width mm (?)

Top Infill Width mm (?)

1st Layer Width mm (?)

Support Width mm (?)

Infill

Infill % (?)

Fill Pattern (?)

Top Fill Pattern (?)

Bottom Fill Pattern (?)

Fill Angle ° (?)

Infill Every N Layers (?)

Solid Infill Every N Layers (?)

Infill Before Perimeters (?)

Only Infill Where Needed (?)

Retract Crossing Perimeters (?)

Bridge Angle ° (?)

Quality & Correction

Seam Position (?)

Bridge Flow Ratio (?)

Detect Overhangs (?)

Detect Thin Walls (?)

Avoid Crossing Perimeters (?)

Fuzzy Skin (?)

Fuzzy Skin Thickness mm (?)

Fuzzy Skin Point Distance mm (?)

Ironing (?)

Ironing Type (?)

XY Size Compensation mm (?)

Elephant Foot Compensation mm (?)

Gap Fill Enabled (?)

Speed

Perimeter mm/s (?)

Small Perimeter mm/s (?)

External Perimeter mm/s (?)

Infill mm/s (?)

Solid Infill mm/s (?)

Top Solid Infill mm/s (?)

Gap Fill mm/s (?)

Bridge mm/s (?)

Support mm/s (?)

Travel mm/s (?)

1st Layer mm/s (?)

Ironing mm/s (?)

Acceleration

Default Accel mm/s² (?)

Perimeter Accel mm/s² (?)

Ext Perimeter Accel mm/s² (?)

Infill Accel mm/s² (?)

Bridge Accel mm/s² (?)

1st Layer Accel mm/s² (?)

Travel Accel mm/s² (?)

Support

Generate Supports (?)

Auto Supports (?)

Buildplate Only Supports (?)

Support Threshold ° (?)

Support Spacing mm (?)

Support Contact Distance mm (?)

Support Interface Layers (?)

Support Interface Spacing mm (?)

Support Style (?)

Support Pattern (?)

Support XY Spacing mm (?)

Adhesion

Raft Layers (?)

Raft Contact Distance mm (?)

Raft Expansion mm (?)

Skirt Loops (?)

Skirt Distance mm (?)

Brim Width mm (?)

Printer & Hardware

Nozzle Diameter mm (?)

Z Offset mm (?)

G-Code Flavor (?)

Max Print Height mm (?)

Min Layer Height mm (?)

Max Layer Height mm (?)

Silent Mode (?)

Relative E Distances (?)

Custom G-Code

Start G-Code (?)

End G-Code (?)

Before Layer G-Code (?)

After Layer G-Code (?)

Toolchange G-Code (?)

Color Change G-Code (?)

Pause G-Code (?)

Filament Info

Filament Type (?)

Filament Diameter mm (?)

Density g/cm³ (?)

Cost / kg (?)

Spool Weight g (?)

Colour (?)

Shrinkage % (?)