Voron 2.4 R2 350 Slicer
Past slice batches.
| ID | Files | Filament | Profile | Status | Created | Actions |
|---|---|---|---|---|---|---|
| 41 |
support.stl
|
PETG | Fast |
success
✓ applied: brim, supports
|
Jun 18, 00:55 | |
| 40 |
2.stl
|
PETG | Fast |
success
Suggested: brim, supports
|
Jun 18, 00:06 | |
| 39 |
poodle_fidget.3mf
|
PETG | Fast |
failed
why?COMMAND: /usr/local/bin/prusa-slicer --export-gcode --load /rails/tmp/slicer_batch_39.ini --center 175.0,175.0 --output /rails/tmp/slicer_batch_39.gcode /rails/tmp/slicer_batch_39_inputs/poodle_fidget.3mf Machine limits cannot be emitted to G-Code when Klipper firmware flavor is used. Change the value of machine_limits_usage. |
Jun 17, 22:41 | |
| 38 |
Buckle v1 (1).stl
|
PETG | Fast | success | Jun 17, 12:58 | |
| 37 |
PrestaBanana.stl
|
PETG | Fast |
success
Suggested: brim, supports
|
Jun 12, 04:04 | |
| 36 |
Knife Butterfly.3MF
|
PETG | Fast |
failed
why?COMMAND: /usr/local/bin/prusa-slicer --export-gcode --load /rails/tmp/slicer_batch_36.ini --center 175.0,175.0 --output /rails/tmp/slicer_batch_36.gcode /rails/tmp/slicer_batch_36_inputs/Knife\ Butterfly.3MF 10 => Processing triangulated mesh 10 => Processing triangulated mesh 10 => Processing triangulated mesh 20 => Generating perimeters 20 => Generating perimeters 30 => Preparing infill 30 => Preparing infill 20 => Generating perimeters 45 => Making infill 30 => Preparing infill 45 => Making infill 45 => Making infill 65 => Searching support spots 65 => Searching support spots 65 => Searching support spots 69 => Alert if supports needed 70 => Generating support material 70 => Generating support material 70 => Generating support material 89 => Calculating overhanging perimeters 89 => Calculating overhanging perimeters 89 => Calculating overhanging perimeters 88 => Generating skirt and brim [2026-06-11 04:34:47.675183] [0x0000766b374ffb40] [error] gcode path conflicts found between body285592 and body2202368 ✓ applied: supports
|
Jun 11, 03:32 | |
| 35 |
Knife Butterfly.3MF
|
PETG | Fast |
failed
why?COMMAND: /usr/local/bin/prusa-slicer --export-gcode --load /rails/tmp/slicer_batch_35.ini --center 175.0,175.0 --output /rails/tmp/slicer_batch_35.gcode /rails/tmp/slicer_batch_35_inputs/Knife\ Butterfly.3MF 10 => Processing triangulated mesh 10 => Processing triangulated mesh 10 => Processing triangulated mesh 20 => Generating perimeters 20 => Generating perimeters 30 => Preparing infill 20 => Generating perimeters 30 => Preparing infill 45 => Making infill 45 => Making infill 30 => Preparing infill 45 => Making infill 65 => Searching support spots 65 => Searching support spots 65 => Searching support spots 69 => Alert if supports needed 70 => Generating support material 70 => Generating support material 70 => Generating support material 89 => Calculating overhanging perimeters 89 => Calculating overhanging perimeters 89 => Calculating overhanging perimeters 88 => Generating skirt and brim [2026-06-11 03:30:00.955597] [0x000073dc4486ab40] [error] gcode path conflicts found between body285592 and body2202368 ✓ applied: supports
|
Jun 11, 02:08 | |
| 34 |
Voron_Design_Cube_v7.stl
|
PETG | Fast | success | Jun 10, 19:15 | |
| 30 |
Knife Butterfly.3MF
|
PETG | In Between |
failed
why?COMMAND: /usr/local/bin/prusa-slicer --export-gcode --load /rails/tmp/slicer_batch_30.ini --center 175.0,175.0 --output /rails/tmp/slicer_batch_30.gcode /rails/tmp/slicer_batch_30_inputs/Knife\ Butterfly.3MF 10 => Processing triangulated mesh 10 => Processing triangulated mesh 10 => Processing triangulated mesh 20 => Generating perimeters 20 => Generating perimeters 30 => Preparing infill 30 => Preparing infill 20 => Generating perimeters 45 => Making infill 30 => Preparing infill 45 => Making infill 45 => Making infill 65 => Searching support spots 65 => Searching support spots 65 => Searching support spots 69 => Alert if supports needed 70 => Generating support material 70 => Generating support material 70 => Generating support material 89 => Calculating overhanging perimeters 89 => Calculating overhanging perimeters 89 => Calculating overhanging perimeters 88 => Generating skirt and brim [2026-05-16 02:58:03.220613] [0x00007e1b59612b40] [error] gcode path conflicts found between body285592 and body2202368 ✓ applied: supports
|
May 16, 02:42 | |
| 29 |
8x8 MU - Bottom Left Grid Interfitted - MultiBoard Octago...
|
PETG | Fast | success | May 16, 02:26 | |
| 28 |
3DW_Multiboard_PartsBin_Multiconnect_W95-L120-H80_dividab...
|
PETG | Fast |
success
✓ applied: supports
|
May 16, 01:46 | |
| 27 |
3DW_Multiboard_PartsBin_Multiconnect_Divider.stl
|
PETG | Fast |
success
✓ applied: brim, supports
|
May 15, 20:55 | |
| 24 |
MultiboardBin.stl
|
PETG | Fast | success | May 15, 04:51 | |
| 23 |
car_seatbelt.stl
|
PETG | Fast | success | May 14, 13:33 | |
| 22 |
Belt Silencer.stl
|
PETG | Fast | success | May 14, 13:11 | |
| 21 |
chain-20-links.stl
|
PETG | Fast |
success
Suggested: brim, supports
|
May 14, 05:38 | |
| 19 |
Belt Silencer.stl
|
PETG | Fast | success | May 13, 13:27 | |
| 18 |
Belt Silencer.stl
|
PETG | In Between | success | May 13, 13:22 | |
| 17 |
Belt Silencer.stl
|
PETG | Fast | success | May 13, 13:21 | |
| 16 |
Multiboard Screwdriver Holder.stl
|
PETG | In Between |
success
✓ applied: supports
|
May 13, 05:01 |
29 batches total
Page 1 of 2
Next →