Voron 2.4 R2 350 Slicer
Batch preview, layout, and slice command.
Batch #37
PETG
Fast
success
PrusaSlicer CLI
prusa-slicer --printer "Voron 2.4 R2 350 High-Flow" --filament_type PETG --load slicer_batch_37.ini PrestaBanana.stl
Preset Config (copy as .ini/.txt)
batch_id=37 printer_profile=Voron 2.4 R2 350 High-Flow filament=PETG profile=fast spacing_mm=20 bed_size_x_mm=350 bed_size_y_mm=350 cell_size_mm=40 bed_shape=0x0,350x0,350x350,0x350 wipe=1 skirts=0 ironing=0 end_gcode=PRINT_END overhangs=1 brim_width=0 fill_angle=45 perimeters=2 thin_walls=1 raft_layers=0 start_gcode=PRINT_START EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature] temperature=235 bridge_speed=38 fill_density=18% fill_pattern=rectilinear gcode_flavor=klipper infill_speed=180 layer_height=0.3 retract_lift=0.2 travel_speed=300 fan_always_on=0 filament_type=PETG max_fan_speed=50 min_fan_speed=25 retract_speed=35 seam_position=nearest gap_fill_speed=60 retract_length=0.7 skirt_distance=3 bed_temperature=80 deretract_speed=35 min_print_speed=8 nozzle_diameter=0.4 perimeter_speed=130 extra_perimeters=0 filament_density=1.27 gap_fill_enabled=1 max_layer_height=0.32 max_print_height=340 min_layer_height=0.08 support_material=0 top_fill_pattern=monotonic top_solid_layers=4 bridge_flow_ratio=0.85 filament_diameter=1.75 first_layer_speed=35 pause_print_gcode=PAUSE before_layer_gcode=_TIMELAPSE_TAKE_FRAME color_change_gcode=M600 filament_shrinkage=0.5 first_layer_height=0.25 solid_infill_speed=160 bottom_fill_pattern=monotonic bottom_solid_layers=4 bridge_acceleration=2500 chamber_temperature=0 infill_acceleration=6500 infill_every_layers=1 travel_acceleration=7000 default_acceleration=5000 fan_below_layer_time=90 max_volumetric_speed=15 retract_layer_change=1 retract_before_travel=1.5 retract_restart_extra=-0.05 small_perimeter_speed=80 infill_extrusion_width=0.5 perimeter_acceleration=3500 support_material_speed=100 support_material_style=snug top_solid_infill_speed=100 first_layer_temperature=240 top_solid_min_thickness=0.8 disable_fan_first_layers=2 external_perimeter_speed=78 first_layer_acceleration=2000 infill_before_perimeters=0 only_infill_where_needed=0 support_material_spacing=2.5 use_relative_e_distances=0 avoid_crossing_perimeters=0 elefant_foot_compensation=0.1 perimeter_extrusion_width=0.45 slowdown_below_layer_time=20 solid_infill_every_layers=0 bottom_solid_min_thickness=0.6 support_material_threshold=45 top_infill_extrusion_width=0.38 first_layer_bed_temperature=85 first_layer_extrusion_width=0.45 solid_infill_extrusion_width=0.45 ensure_vertical_shell_thickness=0 external_perimeter_acceleration=4000 support_material_contact_distance=0.2 support_material_interface_layers=2 external_perimeter_extrusion_width=0.4 support_material_interface_spacing=0.2 only_retract_when_crossing_perimeters=1
Planned Layout (20mm spacing)
| File | X mm | Y mm | Width mm | Depth mm | Measured | Fit |
|---|---|---|---|---|---|---|
| PrestaBanana.stl | 170.25 | 161.54 | 9.5 | 26.93 | stl_bounds | OK |
Bed Preview — 350mm × 350mm
centered layout
PrestaBanana.stl
Slice Log
COMMAND: /usr/local/bin/prusa-slicer --export-gcode --load /rails/tmp/slicer_batch_37.ini --center 175.0,175.0 --output /rails/tmp/slicer_batch_37.gcode /rails/tmp/slicer_batch_37_inputs/PrestaBanana.stl 10 => Processing triangulated mesh 20 => Generating perimeters 30 => Preparing infill 45 => Making infill 65 => Searching support spots 69 => Alert if supports needed print warning: Detected print stability issues: PrestaBanana.stl Low bed adhesion Consider enabling supports. Also consider enabling brim. 89 => Calculating overhanging perimeters 88 => Generating skirt and brim 90 => Exporting G-code to /rails/tmp/slicer_batch_37.gcode Slicing result exported to /rails/tmp/slicer_batch_37.gcode