Voron 2.4 R2 350 Slicer

prusa-slicer --printer "Voron 2.4 R2 350 High-Flow" --filament_type PETG --load slicer_batch_30.ini Knife\ Butterfly.3MF

batch_id=30
printer_profile=Voron 2.4 R2 350 High-Flow
filament=PETG
profile=in_between
spacing_mm=20
bed_size_x_mm=350
bed_size_y_mm=350
cell_size_mm=40
bed_shape=0x0,350x0,350x350,0x350
wipe=1
skirts=0
ironing=0
end_gcode=PRINT_END
overhangs=1
brim_width=0
fill_angle=45
perimeters=3
thin_walls=1
raft_layers=0
start_gcode=PRINT_START EXTRUDER=[first_layer_temperature] BED=[first_layer_bed_temperature]
temperature=240
bridge_speed=30
fill_density=28%
fill_pattern=gyroid
gcode_flavor=klipper
infill_speed=140
layer_height=0.24
retract_lift=0.2
travel_speed=270
fan_always_on=0
filament_type=PETG
max_fan_speed=50
min_fan_speed=25
retract_speed=35
seam_position=aligned
gap_fill_speed=48
retract_length=0.7
skirt_distance=3
bed_temperature=85
deretract_speed=35
min_print_speed=8
nozzle_diameter=0.4
perimeter_speed=100
extra_perimeters=0
filament_density=1.27
gap_fill_enabled=1
max_layer_height=0.32
max_print_height=340
min_layer_height=0.08
support_material=1
top_fill_pattern=monotonic
top_solid_layers=5
bridge_flow_ratio=0.8
filament_diameter=1.75
first_layer_speed=28
pause_print_gcode=PAUSE
before_layer_gcode=_TIMELAPSE_TAKE_FRAME
color_change_gcode=M600
filament_shrinkage=0.5
first_layer_height=0.24
solid_infill_speed=125
bottom_fill_pattern=monotonic
bottom_solid_layers=5
bridge_acceleration=2000
chamber_temperature=0
infill_acceleration=5500
infill_every_layers=1
travel_acceleration=6500
default_acceleration=4000
fan_below_layer_time=90
max_volumetric_speed=15
retract_layer_change=1
retract_before_travel=1.5
retract_restart_extra=-0.05
small_perimeter_speed=60
infill_extrusion_width=0.48
perimeter_acceleration=2800
support_material_speed=80
support_material_style=snug
top_solid_infill_speed=78
first_layer_temperature=245
top_solid_min_thickness=1.0
disable_fan_first_layers=2
external_perimeter_speed=60
first_layer_acceleration=1500
infill_before_perimeters=0
only_infill_where_needed=0
support_material_spacing=2.2
use_relative_e_distances=0
avoid_crossing_perimeters=1
elefant_foot_compensation=0.1
perimeter_extrusion_width=0.45
slowdown_below_layer_time=20
solid_infill_every_layers=0
bottom_solid_min_thickness=0.8
support_material_threshold=50
top_infill_extrusion_width=0.38
first_layer_bed_temperature=90
first_layer_extrusion_width=0.45
solid_infill_extrusion_width=0.45
ensure_vertical_shell_thickness=1
external_perimeter_acceleration=3000
support_material_contact_distance=0.15
support_material_interface_layers=3
external_perimeter_extrusion_width=0.42
support_material_interface_spacing=0.15
only_retract_when_crossing_perimeters=1
support_material_auto=1